• Superior quality Boiled Linseed Oil - Offers good mechanical strength to low fire hand made terracotta. Available in 2L and in 5L bulk pack at desertcart. Traditional sealer for porous terracotta and porous stone floors; Once absorbed and hardened it provides mechanical strength to the surface that has been treated. Can be used with LTP Genuine Turpentine when sealing some terracotta. Ideal for wooden garden furniture and decking. Ideal for impregnating and sealing even the most porous tiles. To remove oxidised linseed oil and other mineral oils see LTP Power Stripper at ASIN B006E1U1ZS. Link; https://www.desertcart.co.uk/s?k=B006E1U1ZS&ref=nb_sb_noss_2 For Application Tools see ; https://www.desertcart.co.uk/LTP-Holder-Multi-directional-application-cleaning/dp/B00H1QPYZM Coverage ; Medium Porosity Terracotta: 1-2 litres per 10m2. Higher Porosity Terracotta: 3-4 litres per 10m2. Drying time: 24 hours between coats, 24- 48 hours for the final coat to dry depending on the conditions. Shelf Life – Up to 4 years for un-opened containers. ›See more product details.

Product description ------------------- LTP Boiled Linseed Oil is the traditional pre-polish sealer for use on terracotta and stone. A rich golden coloured oil ideal for protecting and enhancing machine and hand made terracotta. Fills and hardens within the open pores of the terracotta inhibiting the absorption of grime and fluids. Offers good mechanical strength to low fire hand made terracotta. Ideal for wooden garden furniture and decking. IMPORTANT: Do not let the oil oxidise on the surface of the tile. Remove any surplus, not absorbed into the tiles, within one hour of application using a clean cloth and, if necessary, a little Genuine Turpentine. Experiment on spare tiles to establish the number of coats required to achieve full saturation. Apply by brush a coat at a time until the tiles are saturated. Allow at least 12 hours between each coat to ensure that the oil thoroughly oxidises. Most Terracotta will take one or two coats to reach saturation, while others, particularly some of hand made terracotta, may take as many as four or five coats. Leave the final coat to dry for at least 24 hours before polishing with LTP Clear or Antique Wax or finishing with LTP Ironwax Gloss or Satin. All rags and cloths used should be immediately burnt, or if this is not possible soaked in soapy water before disposing of in a bin. The application cloths should never be crumpled up into a ball. Available in 2L bottle under ASIN; B00ECTRIJ6 or in 5L bulk pack at ASIN;B00ECTRJB8 To remove oxidised linseed oil and other mineral oils see LTP Power Stripper at ASIN B006E1U1ZS. Legal Discler ---------------- Experiment on spare tiles to establish the number of coats required to achieve full saturation. Keep out of the reach of children. Do not drink. Keep/Store away from clothing/combustible materials. Store in a closed container. Dispose of contents/container to hazardous waste collection point. May cause minor on skin contact. May cause minor on eye contact. DO NOT LEAVE SOILED APPLICATION CLOTHS WHERE THEY MAY CONSTITUTE A FIRE RISK, AS THEY ARE LIABLE TO SPONTANEOUS COMBUSTION. Label in Accordance With (EC) No 1272/2008