46 ƒ

Description

This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh..
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing..
SPI interface, for connecting with controller boards likeArduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs..
Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped..
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32). PLEASE READ THE ONLINE INFORMATION CAREFULLY BEFORE USING IT..

Overview This is an E-Ink display HAT for Raspberry Pi series boards, Jetson Nano. 2.13inch 250x122 resolution black and white Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with other controller boards, likeArduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications Operating voltage: 3.3V/5V Interface: SPI Resolution: 250 x 122 Display color: black, white Grey level: 2 Partial refresh time: 0.3s Full refresh time: 2s Refresh power: 26.4mW(typ.) Standby power: <0.017mW Viewing angle: >170° Dot pitch: 0.194 x 0.194 Outline dimension: 65mm x 30.2mm Display size: 23.71mm x 48.55mm Interface SYMBOL--DESCRIPTION VCC-- 3.3V/5V GND--Ground NC--NC DIN--SPI MOSI pin CLK--SPI SCK pin CS--SPI chip selection, low active DC--Data/Command selection (high for data, low for command) RST--External reset, low active BUSY--Busy status output, high active How-to-use Document/User Manual/FAQ: //bit.ly/3hZh77i PACKAGE CONTENT 2.13inch e-Paper HAT x1 RPi screws pack (2pcs) x1 PH2.0 20cm x1

Reviews

2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh

Fast Delivery to Aruba

Easy Returns & Exchanges

Ask About This Product

Similar Products

› Electronics › Computers And Accessories › Computer Components

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Aruba. For more details, please visit our Support Page.

Frequently Asked Questions About 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh in Aruba

Where can I buy 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh online at the best price in the Aruba?

desertcart is the best online shopping platform where you can buy 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh available and ready for delivery in Aruba?

desertcart ships the 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh to Oranjestad, Sint Nicolaas, Santa Cruz, Paradera, Tanki Leendertand more cities in Aruba. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh online?

desertcart buys 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh on desertcart?

Yes, it is absolutely safe to buy 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.