Project Center Desk with Bookcase and 3 Bin Cabinet,Modern-White

The perfect addition for my sewing room. It was easy to assemble. I put it all together myself but did need my husband’s help putting the top on. It’s nice and sturdy. Lots of countertop space. Great storage. I love the longer cubby shelves for storing long bolts of interfacing and long rolls of vinyl. Keep in mind the height if you’re a shorty like me. I’m 5’3”. I’m sure I’ll get used to it but I do have about a 2” platform (old cutting board) I can stand on if I need some extra height when cutting fabric. I have a bar stool that I also bought risers for the legs of because it was too short to sit at. Overall so happy with this purchase. It looks great!

Very well packed with clear directions. Comes in 2 very heavy boxes. Took about 2.5 hrs to assemble. Bought for combo craft/butler pantry room. I think some reviewers have commented the top doesn't securely attach, however, that is an option. We've currently chosen to not attach with the screws for ease of moving. When fully assembled with the top unattached/screwed, it remains very stable. It is quite heavy once assembled and would be immovable if the top was secured. Having the ability to remove the top and move the two pedestals has already proven helpful. One reviewer did provide wonderful details and tips for install, including buying extra wood glue (yes!) and also suggested install of furniture slides. Slides aren't necessary if you don't permanently screw on the top.

Great office/crafts work table!

I’ve been stalking this craft table for a few years and now I finally have a finished room to put it in! YAY!!Project Center- white w one 9-hole cubby pedestal and one long 3-opening pedestal (also got 3 drawers for the long 3-opening pedestal)Comes in two SUPER HEAVY boxes. Seriously. Unless you’re hulk hogan you’re gonna need help getting them inside. My husband and I rolled them in end over end and the box w the pedestals almost did for us. No wonder the FedEx guy dropped them and ran. The box w the drawers was an easy carry tho. They are extremely well packaged- double boxed and strapped and w extra cardboard & styrofoam padding. The first pedestal I put together is the one w 3 long openings you can use for rolls of wrapping paper or something- I’m putting drawers in tho. Assembly of this pedestal took me 3 hrs- with some help from my husband- but I’m a 64 yo woman w knee issues, so there’s that.1st assembly glitch—the drawings in the directions (the holes depicted) aren’t an exact match for the pieces you get, so that annoyance took a little figuring out.2nd assembly glitch—when you’re placing the bolts they need to be absolutely straight (duh- I know) so eyeball them to make sure they are and fix the ones that aren’t- ask me how I know.3rd assembly glitch—do NOT knock the little wooden dowels all the way in- leave them sticking most of the way out. The reason for this is you’ll need to be able to wiggle them into their opposite holes when putting the pieces together (bc the holes don’t line up exactly) and you can’t do that if they’re all the way in bc then they don’t have “wiggle room”.2nd pedestal (the 9 hole cubby) was a lot easier- I didn’t need my husbands help this time bc the pieces were a lot smaller. I learned from yesterday and didn’t have near the amount of trouble w the bolts or dowels. I learned when glueing that I needed to use a small paint brush (really tiny) to apply the glue- I barely had enough glue to put on the two back edges bc it came out of the little bottle they give you so thick- it isn’t a needle nose top like you get w Elmer’s. Also, I at first missed the directions to lay it on its side to attach the end & middle pieces to the bottom- the picture shows it standing upright and that’s what I went by. So, I had to remove the 2 end pieces and the 2 middle dividers, stand the bottom on its edge and then put the pieces back on the bolts/dowels. Pay attention to which way the divider pieces in the middle are facing (refer to the pic)- the cams on the ends/middle are supposed to be facing each other. I had to rearrange the dividers until I had it right.I also added screw-on furniture slides to help w moving the pedestals- 4 on each one. I had to add 3 little washers so the 3/4” screws that came w the slides didn’t end up poking through the other side. Didn’t have shorter ones on hand and was too impatient to go to the store for 1/2” or 5/8” ones. Still made tiny little bumps on the inside tho- but they won’t be noticeable behind the drawers and cubby boxes I got.Next, I put together the 3 drawers. They aren’t bolted or doweled at all, it’s just putting glue in the slots and piecing it together- the little paintbrush was a lifesaver here too. Had to play w it a little to be sure all the pieces were seated into the notches correctly. The way they’ve engineered the sides- one long piece w grooves cut so it can fold- is pretty neat. Hopefully they’ll hold together well despite not having bolts or dowels. The 2nd pedestal and the 3 drawers took me another 3 hours to assemble.Last is the topper, which is one piece- no assembly needed- just place it on top of the pedestals. I haven’t used the screws to attach it permanently to the pedestals but I intend to. I’m REALLY HAPPY w this and it was certainly well worth the wait.Oh- one other point- I got a new desk chair to go with it but it turned out to be too low at the highest setting it goes to, which is 21”. It puts my eyes about 6” above the top (I’m 5’3”)- so plan accordingly for the seating you use w this🙂 ETA: I discovered you can buy replacement pneumatic chair risers, so I’m just going to get one of those that’s longer to replace the one that came w my chair! Yay!

I haven't put the desk together yet but the seller's customer service is top notch. When the desk was delivered it was leaned against my garage but fell over and caused a piece of one of the boards to break. I contacted the seller and they replied immediately. They were in constant contact with me and shipped a replacement part within days. The desk looks to be of great quality and sturdy. I can't wait to put it together.

This is a solid work surface for drafting, crafting, and other light work. It has a lot of storage and a solid top to work on. I covered it with a cutting sheet and mat underneath to not risk damaging the surface. Works great.

I added locking casters so I can use it in the middle of the room, but still move it when needed

My husband and I put this together and had an easy and fun time doing it. All parts were there and the instructions were clear. We didn't waste any time or have to re-do any construction. When finished, I placed it where I had measured and it fit perfectly, as expected. The material is like a finely grained Formica - sturdy, scratch resistant and solid. I worked on a wooden model that had the ability to scratch the surface, but it didn't. My sewing machine, a lamp, a large CD/clock radio, a bobbin winder and other small decorative items fit neatly on the top. The 9 cubby holes hold all my embroidery and crochet projects and the shelf side holds my yarns. Very pleased with this product!