Montech X3 Mesh, 6 Fans - 3x 140mm & 3x 120mm Fixed RGB Lighting Fans, ATX Mid-Tower PC Gaming Case, USB3.0, Door Open Tempered Glass Side Panel, High Airflow, Black

It’s not the highest quality material but it still remains sturdy enough to bang around without worrying about it. The bonus there, it’s VERY light weight. You won’t throw your back out picking this up. The fans included are a huge plus, they are fixed so the speeds cannot be adjusted, but they keep my pc cool and they’re quiet enough to not get annoying. I thought the cable management was going to be a nightmare but it actually turned out to be very manageable. And I gotta say I really like the look of the case itself, very appealing. The ability to shut off the rgb with the simple press of a button on top of the case is a huge W. The rgb is fixed as well, so the colors cannot be changed, but it looks really nice when it’s lit up. I’m very satisfied with my purchase. The case looks great, and my cpu stays cool. I would definitely recommend this case to someone looking to upgrade. 10/10***UPDATE***I also ordered the XR fish tank case for my primary pc. It is absolutely stunning. The fans included were decent quality (5v 3 pin) but I swapped them out to match my aio. There is plenty of room for up to 9 120mm fans. The rear exhaust can fit 1 140mm fan, and the top supports 120mm or140mm fans. Airflow is excellent throughout the case. Cable management was a breeze. Beyond satisfied with my second Montech case.

Nice roomy case. Handles my 300mm long GPU no sweat. 6 fans comes with it. They all light up RGB and are the same. They cannot be synch or programmed, just static RGB, no breathing/cycling. But you get 6 working large fans that are quiet in the price and they're preinstalled and prewired and it's done well. Lots of room and places for cable management. Looks modern without looking like cheese. Comes with mesh filters on all areas. Overall can't say anything bad about it, its a good case, easy to build in, no fussy weird stuff. Lots of room on the back side for cables so you're not trying to stuff it all and hide it.

Pros:* Good build space; the mounts are offset from the top of the case by enough to fit a radiator without interference with a standard size mosfet heatsinks* Excellent airflow, full mesh front panel* Glass panel is nice and secure, but still easy to open and remove* 4 (FOUR!) NVMe bays, which is amazing.Neutral concerns:* HD space is probably not enough for 2 full size drives if you need that* Cable run cut outs are a little on the small side, but serviceable* No filter on front mesh; this is either good or bad depending on your environment and setup* No front panel USB-CCons:* Included fans *are* nominally rgb, but have no connectors. They are IDE powered and controlled with a switch on the case panel.* About the fans: being IDE powered means you have no control or monitoring from the system; a huge problem imo.* Standoffs are attached kind of poorly. They work okay, but it's a good idea to double check them, or you might get one that free-spins like I did.* DOUBLE CHECK your GPU dimensions before buying! The GPUs I have all just *barely* fit, and I had to do a lot of wiggling and assembly order shenanigans to get them in there.Overall: Solidly worth the money, but on a re-buy, I'd skip the version with fans.

The case is very well built and aesthetically pleasing. I love that the glass swings out instead of having to be mounted . If you need to remove the glass , you just swing it out and lift. That simple . Everything fit great and the screw holes are machined perfectly. It was very easy to put my PC together with this case. It says it can only accommodate a 305 mm GPU but there is room to spare so I'm pretty sure I could get something bigger in it. Plenty of room on the side of the case for cable management. This is a very budget-friendly and well functioning case. Save yourself some money and use this case!

I haven’t been able to build a pc in over 10 years, so I was pretty excited to put one together. I ordered the Montech X3 Mesh & I was initially pretty happy with it… until after I spent several days putting everything together & discovered that the front middle fan isn’t spinning, although the LEDs work. As far as everything else, I think it’s a great case for the sale price of $50.UPDATE: After contacting the seller Skytech, they offered me a partial refund because of the non-working fan. They also gave me an email address for the manufacturer Montech. After communicating with them via email, they sent me a replacement fan which arrived today. I haven’t tried replacing the defective fan yet, but I’m trusting that the new one will work. Overall, an excellent customer service experience in dealing with both companies. Changing my rating to add another star 👍UPDATE #2: Montech did send me another fan, but it’s not the same one. It’s a 2-wire instead of 3-wire (which means it can’t be monitored/controlled by the mobo or software) & the LED lights are different enough that it’s noticeable. Not the end of the world & I do appreciate the fact that they sent one.Negatives:•Took 1 week to receive, which is a bit much•1 fan doesn’t spin (replaced)*•Fans are LED & not addressable RGB as the pictures might lead some to believe (although this is pretty clearly stated).•Fans have older style Molex connections that are all daisy chained together.•Cabling is fairly inelegant & comes held together with metal twist ties.•No PC speaker.•Materials aren’t the greatest. The gauge of the metal is pretty thin & a bit flimsy.•No rubber grommets in the cabling passthroughs•It’s perhaps a bit small for some ATX buildsPositives:•Although the geometric aesthetic seems heavily “inspired” by Fractal brand cases, it’s a nice looking case regardless.•Pretty quiet at idle considering the 6 original case fans, the 2 additional fans I added & a 3 fan GPU•Good, simple design of the side panel, which is easily removable by just lifting it off, although the nylon ribbon loop used as a handle might turn some people off.•Side panel is tempered glass instead of plexiglass/plastic.•Small-ish mid tower case, but ATX motherboard, top mounted radiator in a push/pull configuration, 3 140mm, 5 120mm fans, a Corsair RM750 PSU & a 303mm Radeon 6650xt 3 fan GPU all fit in a nice looking package (although connecting the wiring & cable management is a bit of a chore).•Good airflow•It has a decent magnetic dust filter on the top, although that’s actually not great for airflow & will actually trap dust & restrict the hot air that you want to exhaust from your case.•I’ve seen some reviews that complain about the rear expansion card slots being the cheap kind that you have to bend or cut to remove, but the ones I removed when installing a GPU were secured with a slot & screw (much better).•Although the specs say it officially supports GPU’s up to 303mm I managed to squeeze in an MSI Gaming X Trio GeForce RTX 3080 which is 323mm with maybe even a couple of mm’s to spare.Conclusion:*After living with this case for about a month & the experiences that I had with both the seller & manufacturer, I’m adding the 5th star to my rating. It’s more of a budget case so you can’t expect perfection, but for $50 it’s an extremely good case & continues to perform very well.