Bearfire Fit Chevrolet Emblem 5D LED Car Tail Logo Light Badge Lamp Emblem Fit Chevrolet Accessories (Blue)

Description

Note: Pro, this LED bowtie emblem is suitable For for all Chevrolet of cars Voltage:12 (V) Size: 17.0*5.5cm Wiring length: 0.6 meters Weight: 80G Material: ABS plating, 3M glue at the bottom Package Contents:1*Car Auto Tail Logo Light(Other accessories are not included) Note: Avoid giving children a play. Do not accidentally install or disassemble this product during driving. [Tools prepared before installation] Please have the following tools ready before you start: 1. Flat head screwdriver 2. Phillips screwdriver 3. Insulating tape 4. Towel 5. Pliers 【Installation Notes】 1. First place a towel next to the tailgate logo, use a flat-blade screwdriver to shake the logo, and towel to prevent scratching the body. 2. Pay attention to peeling off the double-sided rubber first. When the squatting is moderate, don't be too fierce. After a little bit, slowly squat down, clean the car logo and the double-sided tape on the body. 3. Use a Phillips screwdriver to remove the partition inside the tail box. Note that there are clips in some places. Be careful to remove the baffles to see the various lines. 4. Now install the car standard light, the car standard light power line passes through one of the car standard positioning holes, and wears the single-sided glue on the back of the car standard light inside the car box. While pulling the wire, the car mark light is glued to the vehicle body, and the pressure is pressed. tight. 5. The car light is installed, and now it is connected to the power supply. The car light should be connected to the power supply of the license plate, so that when the night light is turned on, the car light will be turned on at the same time, and the power connector of the rear license plate light is found. Notes： Due to the light and screen setting difference, the item's color may be slightly different from the pictures.