FEPPO 2 in 1 Bag Sealer Heat Seal with Cutter(Batteries Included) Instructions for use 1. Install the battery (turn the power switch to the """"OFF"""" ) 1.1: Open the bottom cover of the sealer by sliding it in the direction of the """"OPEN"""" mark at the bottom of the product. 1.2: Install the battery correctly according to the """"+"""" and """"-"""" signs inside the battery compartment. Make sure that the battery is in reliable contact with the shrapnel at both ends. (If the battery is installed reversely or the battery and the shrapnel cannot be reliably contacted, the sealer will not work) . 1.3: The bottom cover buckle aligns the battery compartment card slot and slides and fastens the bottom cover in the direction marked """"CLOSE"""" at the bottom. The battery installation is complete. 2. Open the bag Push the sealer blade button to the bottom, the inner blade can be used to cut the seal of the packaging bag, and then push the blade button back to the original position after use. 3. Seal the bag 3.1: Turn on the power switch. Turn the power switch from the """"OFF"""" to """"ON"""" . 3.2: Take the opened packaging bag, align its opening end and place it on the heating part of the product. After the heating part clamps the packaging bag strongly, it moves slowly along the edge to be sealed at a constant speed, and the opening position will be slowly sealed ( Notice: You can use the attached sample bag to test before sealing, in order to better experience the sealing effect). 3.3: After sealing, turn the power switch from """"ON"""" to """"OFF"""" and turn off the power switch. 5. Magnetic and lanyard design There is a magnetic strip at the bottom of the bag sealer, which can be attached to the surface of the refrigerator or any metal iron product. There is a lanyard on the side, which can be hung on the hook.
Trustpilot
1 day ago
2 days ago