FlightAware Pro Stick Plus (USB SDR ADS-B Receiver for Raspberry Pi)

Description

FlightAware has revolutionized the world of USB SDR ADS-B receivers with the FlightAware Pro Stick and Pro Stick Plus, high-performance USB R820T2 Defined SDR Radios with an integrated RF amplifier for maximum ADS-B/MLAT performance. The first of its kind, FlightAware Pro Stick is compatible with PiAware and the Raspberry Pi, or any other device that supports USB RTLSDR receivers, and is less expensive than any other USB RTLSDR receiver in the world. The Pro Stick Plus adds an integrated 1090 MHz bandpass filter for greater performance and reception range in areas with moderate RF noise, as is typically experienced in most urban areas. The Pro Stick and Pro Stick Plus are about the size of a traditional USB stick and require no external power. There are no moving parts. Features: Superior performance for ADS-B and MLAT. Increases range 10 20% over Pro Stick when filtering is beneficial / Built-in 1090 MHz filter with R820T2 SDR and USB powered RF amplifier / SD SMA connector results in reduced loss due to wiring / Antenna adapter / Easier to configure / SMA F connector for easy connectivity to high performance antenna / No MCX adapters required. No external adapters required. No external amplifier required. Specifications: Chip: Chip: R820T2 / Amplifier: 19dB with 0.4dB noise figure and OIP3+ 39dB / TCXO: 0.5 ppm / Filter: 1.075 MHz to 1.105 MHz passband with 2.3 dB insertion loss / 30 dB attenuation at other frequencies / Power: 300 mA / Weight: 17 g / 0.6 oz / Dimensions: 95 mm x 32 mm x 13 mm / Antenna port: SMA female requires SMA and optional N-male antenna cable for large antenna / Range: more than 300 nm/550 km depending on quality of installation / performance: 10 20% of Mode S messages. Installation guide - https://s.modmypi.com/fly - Requires a Raspberry Pi, antenna and associated cables for use not included.