BORDAN Smoked LED Tail Light Brake Turn Signal Lights for 2002-2010 FXST Models Sportster 1200 Dyna Smoke Lens Lay Down Style

Easy to install but would have been nicer if turn signal wires had plugs to directly plug n play..no soldering or pinning wires

Very nice look and easy to install. I'm very happy with this purchase

I purchased this mainly due to price and need. I based it off the two photos showing the white tag light on bottom for lighting my license tag location below brake light position. When I got it and put it on correct the white tag light lights my seat up nicely.Its just a lens slanted and barely has a top and no bottom and sides. You basically screw a lens with a circuit board behind it to a half inch black foam to. The foam seals in the lens and electronics. For this reason, you cant install it white tag light down like the photos show in this ad. So beware if your tag is above brake light your “all good” if tag is below don’t buy. I had to fabricate sides and a top to turn it upside down. I needed a light bad and my bikes well ridden so I could rig mine. The lights at night in the smoked lens seemed darker than I would like but it’s opinionated area. Don’t want a ticket, some states have no no laws with tinted windows, lights on motorized vehicles. Check your state to be safe. Shipping is fast, works good, tag light positioning is a big deal. I hope seller gets the correct photos on here.

UPDATE: After 1.5 weeks installed, running light and brake light went out. Contacted CS and they replaced within a week. All good. Installed second light. SAME PROBLEM!! Replaced with my OEM light. Tested light contacts with 9 volt battery to see if they would light up. Both turn signals, license light would light up. No brake light or running light. Must be using defective red LED's or resistors in light. Will not try a third time!! 02 FLSTF Looking for better light. You can gamble on same problem but for a few extra bucks save you some hassel.

Let's start by saying this is not a plug and play light. And on many bikes you have to install load resistors for the blinkers to work. The light isn't the exact shape of oem so it took some finagling but it worked. Cool upgrade but takes some work in many cases.

I've had this brake light on for about a month now and love it on my 07 night train. It cleans up the back of the bike. This tail light is a lot thinner than the stock one. For the license plate light to work and shine on the license plate I did have to take the frame off of the license plate. There are no instructions on how to wire it up. And it is not a plug and play. I have since ordered a second one for a friend.

No good!

The media could not be loaded.  Installed on my 2007 sportster 883. Fits good, looks good. With a sportster tail light wiring diagram it’s pretty easy to figure out how to wire this up.

No escribí ninguna reseña hasta no probarlo bien, ahora si les platico:Desde que lo compre viene solo con los cables sin ningún arnés, yo le instale los arnés que tenia en mi faro original, funcionó según la imagen, sin embargo no quedó por completo en la base cromada, se desplazaba 5 milímetros aproz hacia arriba, eso causó filtración de agua y posterior oxidación de los componentes internos que derivo en la falla de un diodo y ya no funcionó ni el stop ni las luz trasera.Creo que hay mejores opciones y por poca diferencia en precio.Espero les sirva.

La instalé en mi Dyna sin mayor complicación, alumbra bastante bien y se ve súper genial, la recomiendo mucho.