🚴♂️ Protect Your Ride, Elevate Your Game!
RaceFace Crank Boot Protectors are essential rubber boots designed to safeguard your carbon crank arms. Made from a durable proprietary plastic blend, these protectors ensure a secure fit while adding minimal weight, allowing you to maintain peak performance on every ride.
R**.
Perfect little protector. It' working as described!
Perfect little protector. It' working as described! Would buy again for more people in my family...
G**A
Muy recomendable
Cumplen su función y útil y recomiendo. Buena calidad.
T**K
Everythign You Need To Know About RaceFace Crank Boots
RaceFace makes three different boot covers for the following cranks types. I did the resarch to make this east for your. Take a few minutes to read this information.NOTE: When ordering these boot covers you will receive the Carbon Crank Boots (size medium). Read on for details.1. NEXT SL G4 CRANK BOOTSThese are built specifically for the Next SL G4 cranks. Also, these crank boot covers have the word “NEXT” printed on them, whereas the other boots only have RaceFace on them.2. CARBON CRANK BOOTS (this is the version you will receive if ordering here).This is the MEDIUM SIZE boot cover.The carbon crank boot covers are compatible with:- Next SL Cinch (G3)- Sixc Cinch- Chester- Respond- Next/Next SL (24mm Spindle)- Sixc (24mm Spindle)- Also, most other popular carbon MTB cranks and assorted alloy DH cranksThe carbon crank boots are sold under the following part numbers based on color selection. The part number will be printed on a sticker affixed to the package you receive so you can verify what you received.A10066GRY = greyA10066BLU = blueA10066RED = redA10066TURQ = turquoiseA10066YEL = yellowA10066GRN = greenA10066PIN = pinkA10066ORA = orangA10066BLK = black3. ALLOY CRANK BOOTThis is the SMALL SIZE boot cover.The alloy crank boot covers are compatible with:- Turbine Cinch- Atlas Cinch- Atlas (24mm Spindle)- Turbine (24mm Spindle)- Aeffect Cinch (175mm length ONLY)- Also, most other popular alloy MTB cranks (except some alloy DH cranksets)The alloy crank boots are sold under the following part numbers based on color selection. The part number will be printed on a sticker affixed to the package you receive so you can verify what you received.- A10068BLK = black- A10068GRY = grey- A10068BLU = blue- A10068RED = red- A10068TURQ = turquoise- A10068362 = website did not specify color- A10068388 = website did not specify color- A10068021 = website did not specify colorReferenceI pulled this information directly from the RaceFace websiteMy ImpressionThis is a semi-hard plastic that will do the job it is intended for.Although, these crank boots did not fit my cranks from this order, I did purchase a pair from another vendor that sold the correct size (small) for my cranks. However, they are all made from the same material, so I am giving five stars for quality of product.I installed the Alloy Crank Boots (size small) on my Stumpjumper which has Aeffect cranks. They fit good. The only thing I noticed is that the hole were you put your Allen key is a little off, but the boot cover is playable enough that I was able to install it with no problem.
S**E
Not a perfect fit, but works on SRAM NX
They are not exactly a perfect fit, but they work on SRAM NX cranks. See my pictures. When you tighten the pedals they squeeze into place. Will do the job keeping my cranks protected.
P**L
Too small, holes don't line up.
Too small. The holes don't line up like they should. I was able to get them on, BUT I had to stretch the material so it doesn't look as slick as I hoped. . .
N**Z
Fits Standard Crank Arms
Easy to install and give a nice touch to the bike.
J**.
Simple but Awesome Protection
The Race Face crank boot protectors are a simple yet superbly effective solution for protecting a mountain bike crank arm from damage. What you get are molded rubber-like covers that are nice and thick, offering protection from scratches and impact that clear-type "skins" cannot match. Installation is as easy as removing your pedals, slipping the boots on, then re-installing your pedals. I have used these on SRAM/Truvative X9 and X0 cranksets and they fit perfectly.Two things to note: first of all, there is no mention of a specific left or right side on the products, and you would assume that all crank arms are identical in shape at the ends, but if the Race Face boots don't wuite slip all the way onto your crank arm, swap the left boot for the right boot and they should be centered and all the way on (I experienced this with both cranks I tested). Second note - upon reading other reviews here, some say they fit other brand/model cranks, some say they don't - but if you take a look at the Race Face website, they actually have a list of what cranks they know are compatible:(from Race Face website)Fits:Race Face:Next/Next SLSixcRespondSram:XXXONoirFSA:GravityGravity LiteShimano:SaintNotice though that my X9 and X0 crankset is not listed - yet they fit perfectly - so if you do not have any of the cranksets listed the only way you can find out is to try them. Not that big of a deal to experiment since it's only $9 a pair, which is a value considering you are protecting your $250-up crankset from rock strikes and damage.
S**X
Easy fit
Good quality and easy fit.
K**H
Fit well
Look good and fit my Triple B with no issues, seem to be decent thickness/ quality
N**D
Good fit
Needed some protection for the carbon Truvativ Decendants and these are a good fit on them.
T**B
Check your fitment
Bought this to fit on my merida with Shimano Deore 20speed cranks well they don't 2mm gap either side. However they do fit my sora R3000 cranked gravel bike so not a complete waste. Road cranks chunkier than mtb ones
N**C
Great protection.
If you (like me) have a low bottom bracket position, then these are perfect for saving your crank ends from damage. Easy to fit, cheap to replace, what's not to like?
Trustpilot
3 weeks ago
1 week ago
