desertcart
Explore

16 ƒ

Description

  • This kit is made for the booster coil and has a professional circuit diagram for the convenience of electronics enthusiasts.1 set of list：PCB Board/120 ohm resistance/UF4007 ultra-fast recovery diode/N20 transistor/Heat sink/M3 * 6 screws/Boat switch/Pin header (3-8 Pin random).
  • Uses: Chinese-language general experiments, electronic instruments, negative ion generators, scientific small production, etc. This circuit works with a stable high-frequency arc, which is extremely high in temperature and can easily ignite combustibles. Therefore, it is called a plasma lighter..
  • Transformer structure: The transformer has two windings in the primary, one set of thick copper wire is the main winding, one set of thin copper wire is the feedback winding, and the secondary output is high voltage. In the transformer, two thick and thin copper wires are wound together, which are the main winding tail and the feedback winding head, respectively, connected to the positive pole of the power supply..
  • Before welding the transformer, it is necessary to scrape off the welded portion of the coating and the covered wire tip with a blade and then solder. After successful production, the transformer must be potted with epoxy or insulating wax for long-term use. The maximum output of the transformer is designed to be 15KV, and the maximum output must not exceed 15KV, which is 1.5cm arc..
  • The kit has an input voltage of 3.7V. That is, the voltage of the 18650 battery, if you need to increase the input voltage (maximum increase to 12V), you need to increase the resistance of the feedback resistor (package resistance is 120 ohms), otherwise the triode is easy to burn out. The feedback resistance is increased to approximately 150 Ω to 1.5 K Ω. Resistance should be adjusted from large to small. It should not be too small..
Installation Notes: With the PCB board parts better production, in which the transformer line of thick line and thin line, this should pay attention to the other components by the board of silk symbols and parameters of welding on the line. Transformer board has done three pads, in which the middle of the pad hole is relatively large, the hole at the same time welding a thick enameled wire and a thin enameled wire, thick enameled wire and fine enameled wire do not use the same side, such as with the left Thick lines and the right side of the thin wire into or with the left side of the thin line and the right side of the thick line welding into, in short, do not use the same side of the thick lines and thin lines can be. In order to prevent the output 2-wire distance too far, resulting in no-load, you can weld a 3P pin at the output. After the success of the production, if the output access to a high-voltage capacitor and three high-voltage rectifier composed of voltage doubler circuit, you can produce DC high voltage, you can make anion generator, wiring diagram is as follows. Tips: If you are concerned about the quality of the components, please test them one by one before soldering. Once the solder is soldered, it is impossible to judge whether it is soldered or the component itself is bad. Please understand that!

Reviews

15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board)

?
Fast Delivery to Aruba
?
Easy Returns & Exchanges
?
Ask About This Product

Similar Products

Related Pages

› Electronics › Power Accessories

Browse pages with similar products: Voltage Frequency Converters, Transistor Switches, Frequency Inverters, desertcart delivers over 100M+ products to Aruba from around the world.

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Aruba. For more details, please visit our Support Page.

Frequently Asked Questions About 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) in Aruba

Where can I buy 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) online at the best price in the Aruba?

desertcart is the best online shopping platform where you can buy 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) available and ready for delivery in Aruba?

desertcart ships the 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) to Oranjestad, Sint Nicolaas, Santa Cruz, Paradera, Tanki Leendertand more cities in Aruba. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) online?

desertcart buys 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) on desertcart?

Yes, it is absolutely safe to buy 15KV Boost High Voltage Generator High Frequency Transformer Inverter Arc Igniter Coil Module Disassembled Parts for DIY Use 2Sets(Include PCB Board) from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.